info@utscanada.com / 905-669-5327
HomeOur ProductsAcademic
Academic

Research and training solutions in the higher education sector are vital in the development and application of new materials and technologies. The research and development of more effective materials give momentum to our modern industrialized societies. United offers a comprehensive range of testing machines for higher education sector.

EXAMPLES:

►Lightweight Construction Materials, ►Intelligent Materials, ►Biomaterials and Composites, ►Solar Energy, ►Plastic and Metals for Medical Applications. ►Software Solutions.

The ESM1500 is a highly configurable single-column force tester for tension and compression measurement applications up to 1,500lbf (6.7kN).Suitable for laboratory and production environments. The ESM1500 may be used with an indicator-load cell combination or with a force gauge. With generous travel, clearance, and depth dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load of distance, load holding, elongation testing, tensile testing, compression testing, and more. The ESM1500 has a unique, modular function platform. Individual functions, such as travel measurement, cycling, load holding, etc. may be purchased either upfront or enabled in the field trough an activation code. This a-la-carte platform allows for custom configuration as appropriate for the application and budget. 
United Electro-Mechanical Universal SSTM Testing Machine, table model is affordable, ultra-accurate, Single-column Materials Universal Testing Machine for those low capacity testing needs. The United Electro-Mechanical Universal SSTM will conduct tests in tension and or compression (universal). Ideal for use in most testing situations including test labs, R&D applications, quality control and production testing. United 'SMART' Testing Machines meet the requirements of ASTM E-8, and ASTM E-83.
The United Model SSTM Universal Electro Mechanical Testing Machine is a computer inclusive, Electromechanical Universal (tension and compression) Test System designed to accommodate a variety of testing instruments and accessories to test various types of material including ceramics, plastics, polymers, metals, composites: range 0.5 kN to 20 kN. United 'SMART' Testing Machines meet the requirements of ASTM E-8. ASTM-E9 and ASTM E-83.
United High Capacity Smart Universal Hydraulic Floor Model (SHFM) tension and compression testing machines with computer control are available with capacities from 300 kN (67,500 lbf) to 2,000 kN (450,000 lbf). Available with extended columns. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Two words best describe the benefits afforded by United\'s multi-station testing systems: HIGH PRODUCTIVITY. Test up to six samples at once for the cost of about two stand-alone units.
United Electro-Mechanical Universal Testing Machines Table Models are available in three standard load frame capacities: STM-30 with a capacity of 30 kN 6,750 lbf, STM-50 with a capacity of 50 kN 11,250 lbf, STM-100 KN with a capacity of 100 kN 22,500 lbf.
The United TRU-BLUE Rockwell Hardness Tester is computer controlled (closed loop) application of forces are via load cell measurement. The Tester has a 4 x 20 bright vacuum fluorescent display. Front panel controls with Piezo-Electric switches. Auto self-test and last test setup recall at startup. Removable parts clamp used to secure irregular shaped or oversize test specimens. Logical setup and operating menue from front panel keys. Throat depth is 5.5 inches. Optional 9.5 inch throat depth is available.
The ESM 303 Motorized Force Measurement Test Stands are a versatile and precise testing solution for most tension and compression testing applications up to 300 lbf. (1.5 kN) for laboratory and production environments. The Test Stands can perform a wide variety of tests, including break testing, cycling, limit testing to a load distance and more. Speed is adjustable in up and down directions and a remote control unit provides added safety during testing. Other features include a manual fine adjustment knob and a stepper motor that prevents speed variation with load, making testing precise and repeatable. Use this Test Stand with any Mark-10 Force Gauge and grips to create a complete testing solution.
United's Load Cells are designed to precisely measure the amount of force (load) applied to the specimen being tested. Available in single or dual bridge, United load cells offer the flexibility of using two readouts simultaneously, if desired. Constructed to meet ASTM E-4 requirements.
United SFM Smart Electro-Mechanical Universal Floor Models are the logical choice when maximum crosshead travel and load frame capacity are required. The United SFM Models SFM Universal Testing Machines offer a choice of five standard load frame capacities ranging from 1,000 lbf (4.45 kN) to 135,000 lbf (600 kN).Testing can be done in tension and/or compression. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Using a unique laser scanning approach developed by United Calibration Corporation, the United Laser Extensometer permits accurate non-contact extension measurement from the start of the test through sample failure without test interruption. Designed to provide accurate extension measurements from less than 1% to greater than 1000% strain, this versatile optical scanning device performs well for sample testing with an environmental chamber at elevated or even very low test temperatures, as well as at normal temperatures and environments.
Servo-Controlled Hydraulic Floor Model 2000 kN (450,000 lbf). United SHFM 1000 and SHFM 2000  kN Hydraulic Testing Machines have four columns and test in Tension or Compression (Universal). The SHFM Hydraulic testing systems are fully accessorized and include the following at no additional cost: Hydraulic Grips with inserts for both flat flat and round test specimens, Flex Fixture and Compression Plates. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
The United Digital Speedy Tester Model LCH-150KN is a hydraulic testing machine incorporating a highly accurate, built-in digital information system for the display of test data. Designed to perform a variety of tests, the versatile, easy-to-use Speedy Tester can be fitted with various types of grips and fixtures to accommodate a wide range of materials and applications. The Speedy is a Tension Tester, outfitted with a compression cage it can also perform compression tests.
Refurbished Schenck Trebel RME-100 Universal Electromechanical Testing Machine capacity 100kN upgraded with United DATUM Version 5i and DATA USB Retrofit Controller. This Machine eliminates changing Load Cells since the smaller Load Cell is installed on the outside Station.
The TSFM-DC is a Motorized Force Test Stand designed for tension and compression testing of springs, packaging, metals, fabrics and other items requiring up to 500 lbf (2,200 N) of force. Generous clearance and throat depth accommodate a broad range of sample shapes and sizes. The durable and rigid column minimizes bend, making it particularly well suited for spring testing. Use this Test Stand with any Mark-10 Force Gauge and grips to create your complete testing solution.
MicroStar Digital Brinell Hardness Tester Model SHB-3000D Load Cell Force application and measuring system.
Series 7 professional Digital Force Gauges are designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbf (2500 N). The Force Gauges feature ±0.1% accuracy and a blazingly fast, industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests.
MicroStar Series MHV-1000 precision Micro Vickers & Knoop Hardness Machines with integrated technology of optics, mechanics and computations.
MicroStar MZHV-1000V series are fully Automatic Micro Vickers and Knoop Hardness Testers with electronic Microscope Measurement. Automatic Reading using B & W CCD Camera and MV1000 Software.
Micro Star HV-10 Series are semi Automatic smart Vickers Hardness Testing machines, that adopt the close-loop force sensor to replace are controlled the traditional quality weight. This innovative design makes the instrument more accurate. Selection of testing force and dwell time are controlled and monitored on the front panel automatic during process of loading, dwell and unloading.