info@utscanada.com / 905-669-5327

Category Menu

HomeOur ProductsPortable Hardness Testers
Portable Hardness Testers

United Testing Systems Canada Scope of Portable Hardness Testers include: Leeb, Shore, Ultrasonic, Rockwell, Brinell and more.

The MicroStar SH-500 Leeb Hardness Main Features: Multiple Languages selection, memory for 2000 Test Results, saved information including single Measured Value, Mean Value, Impact direction, number of Impacts performed, Material and Hardness. Order No.: 76-05-00

The MicroStar Ultrasonic Portable Hardness Tester Model SU-300 is designed to test hardness of metals on flat, round, thin or large surfaces.

The SH-660 is an innovation of Leeb Hardness Testers, based on a new technology - dual-coil sensor installed in the probe for higher accuracy. 

MH-500E is an advanced state-of-the-art integrated hand held sized Hardness Tester with many features.Using patented dual-coil technology which gives the MH-500E high accuracy: +/-2 HL (or 0.3% @HL800) with high contrast TFT display and durable metal housing. Equipped with impact device E (diamond ball tip) and is especially suitable for testing material after heat treatment. The movable bar-graph display can evaluate the sample upon deviation value in color for easy visual distinction.

Convenience and reliability is what the Clark Portable " Rockwell" Tester, Model CPT, provides the user.  It has the ability to test both inside and outside surfaces at any angle without affecting accuracy.  Quick change indenter, easy to read dial indicators, and finger tip loading make the CPT a handy and efficient form of testing large and inaccessible parts.

Accurate - Calculated to 1/2 of 1% of load. Can be used for higher loads up to 3,000 kg. Versatile - Can be used in virtually any position. Durable - Some King Portable Brinell testers have been working over 60 years. Permanence - Impressions can be checked anytime.

MicroStar PHR series is an accurate and lightweight portable Hardness Tester designed for testing where limited clearance is available. This Rockwell Tester it is not only suitable for measuring small samples but also large parts and irregular parts can be adopted. The tester offsets the problem that the rebound hardness tester poses in accurate testing of small parts.

The United Hammer Brinell Impact Hardness Tester PHB-1 is economical and easy to use. It applies force to the Indenter by the operator using a Hammer or Clamping Device. The force applied is controlled using a calibrated shear pin. When the load applied reaches the shear pin's limit, the shear pin breaks.

PHR series are portable Rockwell Hardness Testers for the measurement of metal and plastic materials these Rockwell Hardness Testers are not only suitable to measure small parts, but also to measure large and fixed parts.