info@utscanada.com / 905-669-5327
HomeOur ProductsASTM-E-83, ISO 9513
ASTM-E-83, ISO 9513

Standard Practice Verification and Classification of Extensometer Systems.

United Electro-Mechanical Universal SSTM Testing Machine, table model is affordable, ultra-accurate, Single-column Materials Universal Testing Machine for those low capacity testing needs. The United Electro-Mechanical Universal SSTM will conduct tests in tension and or compression (universal). Ideal for use in most testing situations including test labs, R&D applications, quality control and production testing. United 'SMART' Testing Machines meet the requirements of ASTM E-8, and ASTM E-83.
The United Model SSTM Universal Electro Mechanical Testing Machine is a computer inclusive, Electromechanical Universal (tension and compression) Test System designed to accommodate a variety of testing instruments and accessories to test various types of material including ceramics, plastics, polymers, metals, composites: range 0.5 kN to 20 kN. United 'SMART' Testing Machines meet the requirements of ASTM E-8. ASTM-E9 and ASTM E-83.
United High Capacity Smart Universal Hydraulic Floor Model (SHFM) tension and compression testing machines with computer control are available with capacities from 300 kN (67,500 lbf) to 2,000 kN (450,000 lbf). Available with extended columns. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
United Electro-Mechanical Universal Testing Machines Table Models are available in three standard load frame capacities: STM-30 with a capacity of 30 kN 6,750 lbf, STM-50 with a capacity of 50 kN 11,250 lbf, STM-100 KN with a capacity of 100 kN 22,500 lbf.
United SFM Smart Electro-Mechanical Universal Floor Models are the logical choice when maximum crosshead travel and load frame capacity are required. The United SFM Models SFM Universal Testing Machines offer a choice of five standard load frame capacities ranging from 1,000 lbf (4.45 kN) to 135,000 lbf (600 kN).Testing can be done in tension and/or compression. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
To accommodate most testing requirements, the EZ Extensometer can be used on either round or flat samples. Each comes with two special features: a built-in overload protection and the automatic gage length setting which helps ensure a high degree of consistency between the users and the testing samples. Special gage lengths are also available upon request. Available in both room and high temperature versions.
Designed for easy clip-on attachment, these versatile high elongation Exensometers are available in gage lengths of 0.5, 1, or 2 inches. With measurement capabilities to 1000% sample elongation, these unique Extensometers also feature built-in over load protection.
Using a unique laser scanning approach developed by United Calibration Corporation, the United Laser Extensometer permits accurate non-contact extension measurement from the start of the test through sample failure without test interruption. Designed to provide accurate extension measurements from less than 1% to greater than 1000% strain, this versatile optical scanning device performs well for sample testing with an environmental chamber at elevated or even very low test temperatures, as well as at normal temperatures and environments.
Servo-Controlled Hydraulic Floor Model 2000 kN (450,000 lbf). United SHFM 1000 and SHFM 2000  kN Hydraulic Testing Machines have four columns and test in Tension or Compression (Universal). The SHFM Hydraulic testing systems are fully accessorized and include the following at no additional cost: Hydraulic Grips with inserts for both flat flat and round test specimens, Flex Fixture and Compression Plates. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Refurbished Schenck Trebel RME-100 Universal Electromechanical Testing Machine capacity 100kN upgraded with United DATUM Version 5i and DATA USB Retrofit Controller. This Machine eliminates changing Load Cells since the smaller Load Cell is installed on the outside Station.
Designed for measuring R-values in sheet metal testing. This Extensometer averages the lateral strain at two locations. 
Series 3542 General purpose Extensometer for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
Model 3542 Axial Extensometer with 2" gauge length and +50/10% measuring range. This Extensometers is designed for testing a wide range of materials, including metals, plastics, composites and ceramics  and will work in tension and compression. The dual flexure design makes them very rugged and insensitive to vibrations, which permits higher frequency operation.
General purpose Extensometer for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
General purpose Extensometer for axial tensile, compression and cycling testing. Gage length from 0.5 to 2 inches and measuring ranges from 5% to 100% strain.
General purpose Extensometer series 3542 for axial tensile, compression and cycle testing. Gage lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain.
Series 3575 Extensometers are designed for general purpose transverse or diametral strain measurement on axially loaded specimens.