/ 905-669-5327
HomeOur ProductsComposites
United High Capacity Smart Universal Hydraulic Floor Model (SHFM) tension and compression testing machines with computer control are available with capacities from 300 kN (67,500 lbf) to 2,000 kN (450,000 lbf). Available with extended columns. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
United Electro-Mechanical Universal Testing Machines Table Models are available in three standard load frame capacities: STM-30 with a capacity of 30 kN 6,750 lbf, STM-50 with a capacity of 50 kN 11,250 lbf, STM-100 KN with a capacity of 100 kN 22,500 lbf.
The United Automatic Carbon Fiber Tester is designed to automatically (without operator intervention) test up to 200 specimens of carbon fiber in one setup. For easy record keeping and generating reports, specimen data are entered into the test software via barcode. The diameter of each fiber specimen is measured by a laser diffraction measuring system.
United SFM Smart Electro-Mechanical Universal Floor Models are the logical choice when maximum crosshead travel and load frame capacity are required. The United SFM Models SFM Universal Testing Machines offer a choice of five standard load frame capacities ranging from 1,000 lbf (4.45 kN) to 135,000 lbf (600 kN).Testing can be done in tension and/or compression. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Using a unique laser scanning approach developed by United Calibration Corporation, the United Laser Extensometer permits accurate non-contact extension measurement from the start of the test through sample failure without test interruption. Designed to provide accurate extension measurements from less than 1% to greater than 1000% strain, this versatile optical scanning device performs well for sample testing with an environmental chamber at elevated or even very low test temperatures, as well as at normal temperatures and environments.
Servo-Controlled Hydraulic Floor Model 2000 kN (450,000 lbf). United SHFM 1000 and SHFM 2000  kN Hydraulic Testing Machines have four columns and test in Tension or Compression (Universal). The SHFM Hydraulic testing systems are fully accessorized and include the following at no additional cost: Hydraulic Grips with inserts for both flat flat and round test specimens, Flex Fixture and Compression Plates. United 'SMART' Testing Machines meet the requirements of ASTM E-8, ASTM E-9 and ASTM E-83.
Refurbished Schenck Trebel RME-100 Universal Electromechanical Testing Machine capacity 100kN upgraded with United DATUM Version 5i and DATA USB Retrofit Controller. This Machine eliminates changing Load Cells since the smaller Load Cell is installed on the outside Station.
Compressive Properties of Unidirectional or Crossply Fiber Resin Composites.
United STD-75-CF Compression Fixture (ASTM-D-3410).