The MICRONXT Extensometer is a versatile, high-performance solution for a wide range of material testing applications. Designed to accommodate samples of various sizes and characteristics, it delivers precise measurements with exceptional resolution, accuracy, and stroke length. - Country of origin Italy.

Designed for measuring R-values in sheet metal testing. This Extensometer averages the lateral strain at two locations. Country of origin U.S.A.

Series 3542 General purpose Extensometer for axial tensile, compression and cycle testing. Gauge lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain. Country of origin U.S.A.

Model 3542 Axial Extensometer with 2" gauge length and +50/10% measuring range. This Extensometers is designed for testing a wide range of materials, including metals, plastics, composites and ceramics  and will work in tension and compression. The dual flexure design makes them very rugged and insensitive to vibrations, which permits higher frequency operation. Country of origin U.S.A.

General purpose Extensometer for axial tensile, compression and cycle testing. Gauge lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain. Country of origin U.S.A.

General purpose Extensometer for axial tensile, compression and cycling testing. Gauge length from 0.5 to 2 inches and measuring ranges from 5% to 100% strain. Country of origin U.S.A.

General purpose Extensometer series 3542 for axial tensile, compression and cycle testing. Gauge lengths from 0.5 to 2 inches (and 10 to 50mm) and measuring ranges from 5% to 100% strain. Country of origin U.S.A.

Series 3575 Extensometers are designed for general purpose transverse or diametral strain measurement on axially loaded specimens. Country of origin U.S.A.

This Extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson ratio. Model 3560BIA uses a design unique, where the knife edges remain parallel during the displacement. This approach greatly reduces crosstalk between axes and allows use on round or flat specimens with equal ease. These Extensometers are very easy to mount, integral springs hold the unit on the test sample. The parallell multiple flexure design makes these units very durable.

United Testing Systems Canada Ltd. UTSC QUASAR 2.5 kN Advanced Universal Testing Machine is the product of state-of-the-art design, built to the highest quality levels and has many advanced technical features.- Country of Origin Italy.

ELAST is a long stroke extensometer dedicated to value % elogation of rubber, high elogation plastics, foam and similar material it is specially indicated to tensile tests on table-top machines. This device is self-standing and it is placed on the back of the testing machine.  In case of a single-column machine, the extensometer can be mounted on left or right side of the frame. 

High precision contactless video extensometer, bi-directional for the analysis of the longitudinal deformation Class 0,5 ISO EN 9513/ASTM E83 B1(depending on focal lens/ PC excluded).

High-precision optical extensometer designed for accurate, non-contact strain and displacement measurement in material testing applications. The system is complaint with major international standards used inmaterial testing, including ISO 9513, ASTM E83, ISO 6892-1, ASTM E8.